![]() ![]() Lower limit of size: Smallest permissible size of a feature of size.īetween the maximum and minimum size limits of a part.įit: Relationship between an external feature of size and an internal feature of size (the hole and shaft of the sameĬlearance: The difference between the size of the hole and the size of the shaft when the diameter of the shaft is smaller than Upper limit of size: Largest permissible size of a feature of size. Limits of Size: Extreme permissible sizes of a feature of size. Upper deviation: The difference between the maximum limiting size and the corresponding nominal sizeĭifference between the minimum limiting size and the corresponding nominal size ![]() ![]() Shaft: External feature of size of a workpiece, including external features of size which are not cylindrical. Hole: Internal feature of size of a workpiece, including internal features of size which are not cylindrical. Of perfect form as defined by the technical drawing.ĭeviation: The difference between a size and the corresponding nominal size. For example H7 tolerance class for holes and h7 tolerance class for shafts. Basic terminology for tolerances and deviations:ĭesignation of the tolerance class: The tolerance class shall be designated by the combination of an upper-case letter(s) for holes and lowercase letters for shafts identifying the fundamental deviation and by the number representing the standard ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |